Karbon A51 Hard Reset Done By Volcako Box Karbon A51 Pattern Lock Unlock Done Karbon A51 Unlock Done

Karbon A51 Hard Reset Done By Volcako Box
Karbon A51 Pattern Lock Unlock Done
Karbon A51 Unlock Done

DONE WITH VOLCANO 2.1.1 VERSION
first select built in boot (6820/8810) then select auto-detect pinout then 
connect by pressing (volume up and power on button)
Detection initiated...
Vcc: null
Gnd: 1
Analyzing D+ and D-...
D+ = 3, D- = 4
Detection D+/D- with 1.50 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 2
Setting...
Find USB device:SPRD U2S Diag (COM36), (VID_1782&PID_4D00)
Pinouts setting complete!

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 00AD00BC
Flash Type:[Hyundai] NAND_HY27UT088G2A
FLASH LEN:0x20000000
>>Set to Factory successfully.

If You Farther Question Please Don't Hesitate to leave a comment.

NOTE::Every Repairing Solution Posted Here Is Tested by at least one member of our group.

Use The information Avail able here at your own risk. We are Not Responsible if any harm comes to 

your device during the repairing proccess..